Vous utilisez un navigateur non à jour ou ancien. Il ne peut pas afficher ce site ou d'autres sites correctement. Vous devez le mettre à jour ou utiliser un navigateur alternatif.
- Multi-Format Sample Loader
Quanta 2 can load AIFF, WAV, Broadcast WAV, FLAC, MP3, and Ogg in any sample rate, bit depth, and channel configuration. It automatically converts the sample to the session's sample rate, and attempts to find the root note.
- Grain Engine
Up to 100 simultaneous grains per voice, of up to 1 second long, with control over grain rate, pitch, direction, shape, length, panning, source position, and level.
- Two Virtual Analog Oscillators
Continuously variable wave shape, with pulse width modulation, and independent control over pitch (separate from grain engine.) Can be injected directly into grain engine.
- Noise Source
Noise source features a "color" control that affects tonal characteristics of the noise. Can be injected directly into grain engine.
- Dual Multi-Mode Filters
Filters can be used in serial or parallel modes, and include lowpass, highpass, bandpass, and notch in 2-pole and 4-pole configurations.
- Flexible Envelope Generator (FEG) x 4
The four FEGs are arbitrary function generators, with up to 99 steps, curve and step level control, arbitrary loop points, and host tempo sync.
- Flexible Low-Frequency Oscillator (FLFO) x 2
The pair of bipolar FLFOs utilize five controls (amplitude, phase, shape, skew, and warp) to access a virtually limitless palette of waveforms, and feature host tempo sync and retrigger.
- Sample And Hold
The S&H mod source can sample noise (random) or any of the other mod sources, at either a user-defined rate or a musical division.
- Modulation Menu
Every mod and MIDI source can be easily and simply assigned to any destination with the right-click context menu. Just right click, and add and remove all mod sources.
- Microtuning With Tuning Tables And Global Tuning Offset
Re-tune Quanta 2 to new intonations and temperaments with native support for ODDSound's MTS-ESP session-wide tuning system. Alternatively, load tuning tables in the open-source and easy-to-use TUN file format. A global tuning offset (default to A=440) allows you to easily retune the entire synth to match a different A frequency without using a tuning table.
- MPE (MIDI Polyphonic Expression)
Quanta 2 understands both "legacy" MIDI and MPE. Use your Linnstrument, Roli Seaboard, Haken Continuum, or Madrona Labs Soundplane (among others) to directly access per-note pressure, pitch bend, and modulation.
- Per-Instance Settings
Quanta 2 utilizes a per-instance customization method: set MPE mode, aftertouch smoothing, pitch bend range override, tuning table, and global tuning offset for each instance in your DAW.
- Factory Presets
Quanta 2 comes with a substantial collection of factory content, including Designer Presets from Marcus Fisher, Joseph Fraioli, Chris Carter, Red. Means Recording, Red Sky Lullaby, and Richard Devine.
- Cross-Platform Preset Format
Quanta 2utilizes an XML-based preset manager, and stores the sample within the preset for easy asset management. Work between multiple systems without troubles, and easily share your creations with your friends, or make a preset bundle to sell, no asset management required.
- Fully Resizable Hi-Dpi/Retina GUI Quanta 2's vector-based GUI is resolution-agnostic, and displays the same on every system and resolution. Easily resize the UI (per instance) to match your visual needs, from postage stamp to poster-sized, and save your preferred size in the global settings.
- Multi-Format Sample Loader
Quanta 2 can load AIFF, WAV, Broadcast WAV, FLAC, MP3, and Ogg in any sample rate, bit depth, and channel configuration. It automatically converts the sample to the session's sample rate, and attempts to find the root note.
- Grain Engine
Up to 100 simultaneous grains per voice, of up to 1 second long, with control over grain rate, pitch, direction, shape, length, panning, source position, and level.
- Two Virtual Analog Oscillators
Continuously variable wave shape, with pulse width modulation, and independent control over pitch (separate from grain engine.) Can be injected directly into grain engine.
- Noise Source
Noise source features a "color" control that affects tonal characteristics of the noise. Can be injected directly into grain engine.
- Dual Multi-Mode Filters
Filters can be used in serial or parallel modes, and include lowpass, highpass, bandpass, and notch in 2-pole and 4-pole configurations.
- Flexible Envelope Generator (FEG) x 4
The four FEGs are arbitrary function generators, with up to 99 steps, curve and step level control, arbitrary loop points, and host tempo sync.
- Flexible Low-Frequency Oscillator (FLFO) x 2
The pair of bipolar FLFOs utilize five controls (amplitude, phase, shape, skew, and warp) to access a virtually limitless palette of waveforms, and feature host tempo sync and retrigger.
- Sample And Hold
The S&H mod source can sample noise (random) or any of the other mod sources, at either a user-defined rate or a musical division.
- Modulation Menu
Every mod and MIDI source can be easily and simply assigned to any destination with the right-click context menu. Just right click, and add and remove all mod sources.
- Microtuning With Tuning Tables And Global Tuning Offset
Re-tune Quanta 2 to new intonations and temperaments with native support for ODDSound's MTS-ESP session-wide tuning system. Alternatively, load tuning tables in the open-source and easy-to-use TUN file format. A global tuning offset (default to A=440) allows you to easily retune the entire synth to match a different A frequency without using a tuning table.
- MPE (MIDI Polyphonic Expression)
Quanta 2 understands both "legacy" MIDI and MPE. Use your Linnstrument, Roli Seaboard, Haken Continuum, or Madrona Labs Soundplane (among others) to directly access per-note pressure, pitch bend, and modulation.
- Per-Instance Settings
Quanta 2 utilizes a per-instance customization method: set MPE mode, aftertouch smoothing, pitch bend range override, tuning table, and global tuning offset for each instance in your DAW.
- Factory Presets
Quanta 2 comes with a substantial collection of factory content, including Designer Presets from Marcus Fisher, Joseph Fraioli, Chris Carter, Red. Means Recording, Red Sky Lullaby, and Richard Devine.
- Cross-Platform Preset Format
Quanta 2utilizes an XML-based preset manager, and stores the sample within the preset for easy asset management. Work between multiple systems without troubles, and easily share your creations with your friends, or make a preset bundle to sell, no asset management required.
- Fully Resizable Hi-Dpi/Retina GUI Quanta 2's vector-based GUI is resolution-agnostic, and displays the same on every system and resolution. Easily resize the UI (per instance) to match your visual needs, from postage stamp to poster-sized, and save your preferred size in the global settings.
- Multi-Format Sample Loader
Quanta 2 can load AIFF, WAV, Broadcast WAV, FLAC, MP3, and Ogg in any sample rate, bit depth, and channel configuration. It automatically converts the sample to the session's sample rate, and attempts to find the root note.
- Grain Engine
Up to 100 simultaneous grains per voice, of up to 1 second long, with control over grain rate, pitch, direction, shape, length, panning, source position, and level.
- Two Virtual Analog Oscillators
Continuously variable wave shape, with pulse width modulation, and independent control over pitch (separate from grain engine.) Can be injected directly into grain engine.
- Noise Source
Noise source features a "color" control that affects tonal characteristics of the noise. Can be injected directly into grain engine.
- Dual Multi-Mode Filters
Filters can be used in serial or parallel modes, and include lowpass, highpass, bandpass, and notch in 2-pole and 4-pole configurations.
- Flexible Envelope Generator (FEG) x 4
The four FEGs are arbitrary function generators, with up to 99 steps, curve and step level control, arbitrary loop points, and host tempo sync.
- Flexible Low-Frequency Oscillator (FLFO) x 2
The pair of bipolar FLFOs utilize five controls (amplitude, phase, shape, skew, and warp) to access a virtually limitless palette of waveforms, and feature host tempo sync and retrigger.
- Sample And Hold
The S&H mod source can sample noise (random) or any of the other mod sources, at either a user-defined rate or a musical division.
- Modulation Menu
Every mod and MIDI source can be easily and simply assigned to any destination with the right-click context menu. Just right click, and add and remove all mod sources.
- Microtuning With Tuning Tables And Global Tuning Offset
Re-tune Quanta 2 to new intonations and temperaments with native support for ODDSound's MTS-ESP session-wide tuning system. Alternatively, load tuning tables in the open-source and easy-to-use TUN file format. A global tuning offset (default to A=440) allows you to easily retune the entire synth to match a different A frequency without using a tuning table.
- MPE (MIDI Polyphonic Expression)
Quanta 2 understands both "legacy" MIDI and MPE. Use your Linnstrument, Roli Seaboard, Haken Continuum, or Madrona Labs Soundplane (among others) to directly access per-note pressure, pitch bend, and modulation.
- Per-Instance Settings
Quanta 2 utilizes a per-instance customization method: set MPE mode, aftertouch smoothing, pitch bend range override, tuning table, and global tuning offset for each instance in your DAW.
- Factory Presets
Quanta 2 comes with a substantial collection of factory content, including Designer Presets from Marcus Fisher, Joseph Fraioli, Chris Carter, Red. Means Recording, Red Sky Lullaby, and Richard Devine.
- Cross-Platform Preset Format
Quanta 2utilizes an XML-based preset manager, and stores the sample within the preset for easy asset management. Work between multiple systems without troubles, and easily share your creations with your friends, or make a preset bundle to sell, no asset management required.
- Fully Resizable Hi-Dpi/Retina GUI Quanta 2's vector-based GUI is resolution-agnostic, and displays the same on every system and resolution. Easily resize the UI (per instance) to match your visual needs, from postage stamp to poster-sized, and save your preferred size in the global settings.
- Multi-Format Sample Loader
Quanta 2 can load AIFF, WAV, Broadcast WAV, FLAC, MP3, and Ogg in any sample rate, bit depth, and channel configuration. It automatically converts the sample to the session's sample rate, and attempts to find the root note.
- Grain Engine
Up to 100 simultaneous grains per voice, of up to 1 second long, with control over grain rate, pitch, direction, shape, length, panning, source position, and level.
- Two Virtual Analog Oscillators
Continuously variable wave shape, with pulse width modulation, and independent control over pitch (separate from grain engine.) Can be injected directly into grain engine.
- Noise Source
Noise source features a "color" control that affects tonal characteristics of the noise. Can be injected directly into grain engine.
- Dual Multi-Mode Filters
Filters can be used in serial or parallel modes, and include lowpass, highpass, bandpass, and notch in 2-pole and 4-pole configurations.
- Flexible Envelope Generator (FEG) x 4
The four FEGs are arbitrary function generators, with up to 99 steps, curve and step level control, arbitrary loop points, and host tempo sync.
- Flexible Low-Frequency Oscillator (FLFO) x 2
The pair of bipolar FLFOs utilize five controls (amplitude, phase, shape, skew, and warp) to access a virtually limitless palette of waveforms, and feature host tempo sync and retrigger.
- Sample And Hold
The S&H mod source can sample noise (random) or any of the other mod sources, at either a user-defined rate or a musical division.
- Modulation Menu
Every mod and MIDI source can be easily and simply assigned to any destination with the right-click context menu. Just right click, and add and remove all mod sources.
- Microtuning With Tuning Tables And Global Tuning Offset
Re-tune Quanta 2 to new intonations and temperaments with native support for ODDSound's MTS-ESP session-wide tuning system. Alternatively, load tuning tables in the open-source and easy-to-use TUN file format. A global tuning offset (default to A=440) allows you to easily retune the entire synth to match a different A frequency without using a tuning table.
- MPE (MIDI Polyphonic Expression)
Quanta 2 understands both "legacy" MIDI and MPE. Use your Linnstrument, Roli Seaboard, Haken Continuum, or Madrona Labs Soundplane (among others) to directly access per-note pressure, pitch bend, and modulation.
- Per-Instance Settings
Quanta 2 utilizes a per-instance customization method: set MPE mode, aftertouch smoothing, pitch bend range override, tuning table, and global tuning offset for each instance in your DAW.
- Factory Presets
Quanta 2 comes with a substantial collection of factory content, including Designer Presets from Marcus Fisher, Joseph Fraioli, Chris Carter, Red. Means Recording, Red Sky Lullaby, and Richard Devine.
- Cross-Platform Preset Format
Quanta 2utilizes an XML-based preset manager, and stores the sample within the preset for easy asset management. Work between multiple systems without troubles, and easily share your creations with your friends, or make a preset bundle to sell, no asset management required.
- Fully Resizable Hi-Dpi/Retina GUI Quanta 2's vector-based GUI is resolution-agnostic, and displays the same on every system and resolution. Easily resize the UI (per instance) to match your visual needs, from postage stamp to poster-sized, and save your preferred size in the global settings.
- Multi-Format Sample Loader
Quanta 2 can load AIFF, WAV, Broadcast WAV, FLAC, MP3, and Ogg in any sample rate, bit depth, and channel configuration. It automatically converts the sample to the session's sample rate, and attempts to find the root note.
- Grain Engine
Up to 100 simultaneous grains per voice, of up to 1 second long, with control over grain rate, pitch, direction, shape, length, panning, source position, and level.
- Two Virtual Analog Oscillators
Continuously variable wave shape, with pulse width modulation, and independent control over pitch (separate from grain engine.) Can be injected directly into grain engine.
- Noise Source
Noise source features a "color" control that affects tonal characteristics of the noise. Can be injected directly into grain engine.
- Dual Multi-Mode Filters
Filters can be used in serial or parallel modes, and include lowpass, highpass, bandpass, and notch in 2-pole and 4-pole configurations.
- Flexible Envelope Generator (FEG) x 4
The four FEGs are arbitrary function generators, with up to 99 steps, curve and step level control, arbitrary loop points, and host tempo sync.
- Flexible Low-Frequency Oscillator (FLFO) x 2
The pair of bipolar FLFOs utilize five controls (amplitude, phase, shape, skew, and warp) to access a virtually limitless palette of waveforms, and feature host tempo sync and retrigger.
- Sample And Hold
The S&H mod source can sample noise (random) or any of the other mod sources, at either a user-defined rate or a musical division.
- Modulation Menu
Every mod and MIDI source can be easily and simply assigned to any destination with the right-click context menu. Just right click, and add and remove all mod sources.
- Microtuning With Tuning Tables And Global Tuning Offset
Re-tune Quanta 2 to new intonations and temperaments with native support for ODDSound's MTS-ESP session-wide tuning system. Alternatively, load tuning tables in the open-source and easy-to-use TUN file format. A global tuning offset (default to A=440) allows you to easily retune the entire synth to match a different A frequency without using a tuning table.
- MPE (MIDI Polyphonic Expression)
Quanta 2 understands both "legacy" MIDI and MPE. Use your Linnstrument, Roli Seaboard, Haken Continuum, or Madrona Labs Soundplane (among others) to directly access per-note pressure, pitch bend, and modulation.
- Per-Instance Settings
Quanta 2 utilizes a per-instance customization method: set MPE mode, aftertouch smoothing, pitch bend range override, tuning table, and global tuning offset for each instance in your DAW.
- Factory Presets
Quanta 2 comes with a substantial collection of factory content, including Designer Presets from Marcus Fisher, Joseph Fraioli, Chris Carter, Red. Means Recording, Red Sky Lullaby, and Richard Devine.
- Cross-Platform Preset Format
Quanta 2utilizes an XML-based preset manager, and stores the sample within the preset for easy asset management. Work between multiple systems without troubles, and easily share your creations with your friends, or make a preset bundle to sell, no asset management required.
- Fully Resizable Hi-Dpi/Retina GUI Quanta 2's vector-based GUI is resolution-agnostic, and displays the same on every system and resolution. Easily resize the UI (per instance) to match your visual needs, from postage stamp to poster-sized, and save your preferred size in the global settings.
- Multi-Format Sample Loader
Quanta 2 can load AIFF, WAV, Broadcast WAV, FLAC, MP3, and Ogg in any sample rate, bit depth, and channel configuration. It automatically converts the sample to the session's sample rate, and attempts to find the root note.
- Grain Engine
Up to 100 simultaneous grains per voice, of up to 1 second long, with control over grain rate, pitch, direction, shape, length, panning, source position, and level.
- Two Virtual Analog Oscillators
Continuously variable wave shape, with pulse width modulation, and independent control over pitch (separate from grain engine.) Can be injected directly into grain engine.
- Noise Source
Noise source features a "color" control that affects tonal characteristics of the noise. Can be injected directly into grain engine.
- Dual Multi-Mode Filters
Filters can be used in serial or parallel modes, and include lowpass, highpass, bandpass, and notch in 2-pole and 4-pole configurations.
- Flexible Envelope Generator (FEG) x 4
The four FEGs are arbitrary function generators, with up to 99 steps, curve and step level control, arbitrary loop points, and host tempo sync.
- Flexible Low-Frequency Oscillator (FLFO) x 2
The pair of bipolar FLFOs utilize five controls (amplitude, phase, shape, skew, and warp) to access a virtually limitless palette of waveforms, and feature host tempo sync and retrigger.
- Sample And Hold
The S&H mod source can sample noise (random) or any of the other mod sources, at either a user-defined rate or a musical division.
- Modulation Menu
Every mod and MIDI source can be easily and simply assigned to any destination with the right-click context menu. Just right click, and add and remove all mod sources.
- Microtuning With Tuning Tables And Global Tuning Offset
Re-tune Quanta 2 to new intonations and temperaments with native support for ODDSound's MTS-ESP session-wide tuning system. Alternatively, load tuning tables in the open-source and easy-to-use TUN file format. A global tuning offset (default to A=440) allows you to easily retune the entire synth to match a different A frequency without using a tuning table.
- MPE (MIDI Polyphonic Expression)
Quanta 2 understands both "legacy" MIDI and MPE. Use your Linnstrument, Roli Seaboard, Haken Continuum, or Madrona Labs Soundplane (among others) to directly access per-note pressure, pitch bend, and modulation.
- Per-Instance Settings
Quanta 2 utilizes a per-instance customization method: set MPE mode, aftertouch smoothing, pitch bend range override, tuning table, and global tuning offset for each instance in your DAW.
- Factory Presets
Quanta 2 comes with a substantial collection of factory content, including Designer Presets from Marcus Fisher, Joseph Fraioli, Chris Carter, Red. Means Recording, Red Sky Lullaby, and Richard Devine.
- Cross-Platform Preset Format
Quanta 2utilizes an XML-based preset manager, and stores the sample within the preset for easy asset management. Work between multiple systems without troubles, and easily share your creations with your friends, or make a preset bundle to sell, no asset management required.
- Fully Resizable Hi-Dpi/Retina GUI Quanta 2's vector-based GUI is resolution-agnostic, and displays the same on every system and resolution. Easily resize the UI (per instance) to match your visual needs, from postage stamp to poster-sized, and save your preferred size in the global settings.
- Multi-Format Sample Loader
Quanta 2 can load AIFF, WAV, Broadcast WAV, FLAC, MP3, and Ogg in any sample rate, bit depth, and channel configuration. It automatically converts the sample to the session's sample rate, and attempts to find the root note.
- Grain Engine
Up to 100 simultaneous grains per voice, of up to 1 second long, with control over grain rate, pitch, direction, shape, length, panning, source position, and level.
- Two Virtual Analog Oscillators
Continuously variable wave shape, with pulse width modulation, and independent control over pitch (separate from grain engine.) Can be injected directly into grain engine.
- Noise Source
Noise source features a "color" control that affects tonal characteristics of the noise. Can be injected directly into grain engine.
- Dual Multi-Mode Filters
Filters can be used in serial or parallel modes, and include lowpass, highpass, bandpass, and notch in 2-pole and 4-pole configurations.
- Flexible Envelope Generator (FEG) x 4
The four FEGs are arbitrary function generators, with up to 99 steps, curve and step level control, arbitrary loop points, and host tempo sync.
- Flexible Low-Frequency Oscillator (FLFO) x 2
The pair of bipolar FLFOs utilize five controls (amplitude, phase, shape, skew, and warp) to access a virtually limitless palette of waveforms, and feature host tempo sync and retrigger.
- Sample And Hold
The S&H mod source can sample noise (random) or any of the other mod sources, at either a user-defined rate or a musical division.
- Modulation Menu
Every mod and MIDI source can be easily and simply assigned to any destination with the right-click context menu. Just right click, and add and remove all mod sources.
- Microtuning With Tuning Tables And Global Tuning Offset
Re-tune Quanta 2 to new intonations and temperaments with native support for ODDSound's MTS-ESP session-wide tuning system. Alternatively, load tuning tables in the open-source and easy-to-use TUN file format. A global tuning offset (default to A=440) allows you to easily retune the entire synth to match a different A frequency without using a tuning table.
- MPE (MIDI Polyphonic Expression)
Quanta 2 understands both "legacy" MIDI and MPE. Use your Linnstrument, Roli Seaboard, Haken Continuum, or Madrona Labs Soundplane (among others) to directly access per-note pressure, pitch bend, and modulation.
- Per-Instance Settings
Quanta 2 utilizes a per-instance customization method: set MPE mode, aftertouch smoothing, pitch bend range override, tuning table, and global tuning offset for each instance in your DAW.
- Factory Presets
Quanta 2 comes with a substantial collection of factory content, including Designer Presets from Marcus Fisher, Joseph Fraioli, Chris Carter, Red. Means Recording, Red Sky Lullaby, and Richard Devine.
- Cross-Platform Preset Format
Quanta 2utilizes an XML-based preset manager, and stores the sample within the preset for easy asset management. Work between multiple systems without troubles, and easily share your creations with your friends, or make a preset bundle to sell, no asset management required.
- Fully Resizable Hi-Dpi/Retina GUI Quanta 2's vector-based GUI is resolution-agnostic, and displays the same on every system and resolution. Easily resize the UI (per instance) to match your visual needs, from postage stamp to poster-sized, and save your preferred size in the global settings.
- Multi-Format Sample Loader
Quanta 2 can load AIFF, WAV, Broadcast WAV, FLAC, MP3, and Ogg in any sample rate, bit depth, and channel configuration. It automatically converts the sample to the session's sample rate, and attempts to find the root note.
- Grain Engine
Up to 100 simultaneous grains per voice, of up to 1 second long, with control over grain rate, pitch, direction, shape, length, panning, source position, and level.
- Two Virtual Analog Oscillators
Continuously variable wave shape, with pulse width modulation, and independent control over pitch (separate from grain engine.) Can be injected directly into grain engine.
- Noise Source
Noise source features a "color" control that affects tonal characteristics of the noise. Can be injected directly into grain engine.
- Dual Multi-Mode Filters
Filters can be used in serial or parallel modes, and include lowpass, highpass, bandpass, and notch in 2-pole and 4-pole configurations.
- Flexible Envelope Generator (FEG) x 4
The four FEGs are arbitrary function generators, with up to 99 steps, curve and step level control, arbitrary loop points, and host tempo sync.
- Flexible Low-Frequency Oscillator (FLFO) x 2
The pair of bipolar FLFOs utilize five controls (amplitude, phase, shape, skew, and warp) to access a virtually limitless palette of waveforms, and feature host tempo sync and retrigger.
- Sample And Hold
The S&H mod source can sample noise (random) or any of the other mod sources, at either a user-defined rate or a musical division.
- Modulation Menu
Every mod and MIDI source can be easily and simply assigned to any destination with the right-click context menu. Just right click, and add and remove all mod sources.
- Microtuning With Tuning Tables And Global Tuning Offset
Re-tune Quanta 2 to new intonations and temperaments with native support for ODDSound's MTS-ESP session-wide tuning system. Alternatively, load tuning tables in the open-source and easy-to-use TUN file format. A global tuning offset (default to A=440) allows you to easily retune the entire synth to match a different A frequency without using a tuning table.
- MPE (MIDI Polyphonic Expression)
Quanta 2 understands both "legacy" MIDI and MPE. Use your Linnstrument, Roli Seaboard, Haken Continuum, or Madrona Labs Soundplane (among others) to directly access per-note pressure, pitch bend, and modulation.
- Per-Instance Settings
Quanta 2 utilizes a per-instance customization method: set MPE mode, aftertouch smoothing, pitch bend range override, tuning table, and global tuning offset for each instance in your DAW.
- Factory Presets
Quanta 2 comes with a substantial collection of factory content, including Designer Presets from Marcus Fisher, Joseph Fraioli, Chris Carter, Red. Means Recording, Red Sky Lullaby, and Richard Devine.
- Cross-Platform Preset Format
Quanta 2utilizes an XML-based preset manager, and stores the sample within the preset for easy asset management. Work between multiple systems without troubles, and easily share your creations with your friends, or make a preset bundle to sell, no asset management required.
- Fully Resizable Hi-Dpi/Retina GUI Quanta 2's vector-based GUI is resolution-agnostic, and displays the same on every system and resolution. Easily resize the UI (per instance) to match your visual needs, from postage stamp to poster-sized, and save your preferred size in the global settings.
- Multi-Format Sample Loader
Quanta 2 can load AIFF, WAV, Broadcast WAV, FLAC, MP3, and Ogg in any sample rate, bit depth, and channel configuration. It automatically converts the sample to the session's sample rate, and attempts to find the root note.
- Grain Engine
Up to 100 simultaneous grains per voice, of up to 1 second long, with control over grain rate, pitch, direction, shape, length, panning, source position, and level.
- Two Virtual Analog Oscillators
Continuously variable wave shape, with pulse width modulation, and independent control over pitch (separate from grain engine.) Can be injected directly into grain engine.
- Noise Source
Noise source features a "color" control that affects tonal characteristics of the noise. Can be injected directly into grain engine.
- Dual Multi-Mode Filters
Filters can be used in serial or parallel modes, and include lowpass, highpass, bandpass, and notch in 2-pole and 4-pole configurations.
- Flexible Envelope Generator (FEG) x 4
The four FEGs are arbitrary function generators, with up to 99 steps, curve and step level control, arbitrary loop points, and host tempo sync.
- Flexible Low-Frequency Oscillator (FLFO) x 2
The pair of bipolar FLFOs utilize five controls (amplitude, phase, shape, skew, and warp) to access a virtually limitless palette of waveforms, and feature host tempo sync and retrigger.
- Sample And Hold
The S&H mod source can sample noise (random) or any of the other mod sources, at either a user-defined rate or a musical division.
- Modulation Menu
Every mod and MIDI source can be easily and simply assigned to any destination with the right-click context menu. Just right click, and add and remove all mod sources.
- Microtuning With Tuning Tables And Global Tuning Offset
Re-tune Quanta 2 to new intonations and temperaments with native support for ODDSound's MTS-ESP session-wide tuning system. Alternatively, load tuning tables in the open-source and easy-to-use TUN file format. A global tuning offset (default to A=440) allows you to easily retune the entire synth to match a different A frequency without using a tuning table.
- MPE (MIDI Polyphonic Expression)
Quanta 2 understands both "legacy" MIDI and MPE. Use your Linnstrument, Roli Seaboard, Haken Continuum, or Madrona Labs Soundplane (among others) to directly access per-note pressure, pitch bend, and modulation.
- Per-Instance Settings
Quanta 2 utilizes a per-instance customization method: set MPE mode, aftertouch smoothing, pitch bend range override, tuning table, and global tuning offset for each instance in your DAW.
- Factory Presets
Quanta 2 comes with a substantial collection of factory content, including Designer Presets from Marcus Fisher, Joseph Fraioli, Chris Carter, Red. Means Recording, Red Sky Lullaby, and Richard Devine.
- Cross-Platform Preset Format
Quanta 2utilizes an XML-based preset manager, and stores the sample within the preset for easy asset management. Work between multiple systems without troubles, and easily share your creations with your friends, or make a preset bundle to sell, no asset management required.
- Fully Resizable Hi-Dpi/Retina GUI Quanta 2's vector-based GUI is resolution-agnostic, and displays the same on every system and resolution. Easily resize the UI (per instance) to match your visual needs, from postage stamp to poster-sized, and save your preferred size in the global settings.
